Champion Door Logo
SAADA HINNAPÄÄRING
SEND INQUIRY

Väravadisain

Lifting gates and partitions Champion Door can be installed in several ways: directly in the opening, overlay on the opening from the inside or outside of the building.

Basic characteristics of the "Champion Door":

  • unlimited sizes;
  • resistance to wind loads up to 145 km / h;
  • heat transfer coefficient 0.71 W / m2 • K in the basic model with insulation, in the presence of an additional heat-insulating layer - 0.57 W / m2 • K;
  • lifting speed of the web from 0.2 to 0.5 meters per second;
  • low weight of PVC construction - only 850 g per m2.
  • it is possible to manufacture doors from a leaf with a thickness of 180, 280 or 400 mm;

Aviation gates “Champion Door” are resistant to strong wind loads and temperature extremes, according to the current standards, they are equipped with protection against dust and moisture penetration into the aircraft hangar. When designing, options are available:

  • production of canvas with windows;
  • reinforced noise and / or thermal insulation;
  • manual opening, emergency;
  • anti-vandal protection;
  • installation of connectors for equipment;
  • production of PVC cloth for the thermo range - 60 ° С ... + 200 ° С;
  • equipping with sound and light signaling;
  • automatic fixing of lifting racks;
  • other options.

Hangar doors can be either single-section (if the opening is for a small aircraft), or consist of several sections with lifting support legs. Multi-section doors are practically unlimited in size, stand-alone modules can be opened both at once as a whole or separately.

The operator on his own will be able to inspect the gate approximately once every 4 months, but, at the request of the customer, within the framework of a separate contract, our specialists can perform annual maintenance and safety checks of the delivered Goods.

 

There are no Champion Door in the gate design! rubbing consumables (springs, rollers, latches, counterweights, etc.), so the costs of their maintenance are reduced to zero.

View other services

Warranty service and technical support

Garantiiteenus ja tehniline tugi Väravakonstruktsioonis puuduvad hõõrduvad kulumaterjalid (vedrud, rullikud, sulgurid, vastukaalud jne), mistõttu nende hoolduskulud vähenevad peaaegu nullini Operaator saab ise väravat kontrollida umbes kord 4 kuu jooksul, kuid kliendi soovil, eraldi lepingu raames, saavad meie spetsialistid teha tarnitud kaubale iga-aastase hoolduse ja ohutuskontrolli. Garantii kohaldamisala. Garantii antakse nii Champion Door värava- ja vaheseinatoodetele kui ka paigaldusele. Garantii kehtivus. Garantii kehtib 2 (kaks) aastat alates tarnekuupäevast. Eraldi hoolduslepingu sõlmimisel kehtib garantii 3 (kolm) aastat alates tarnekuupäevast, st garantii pikeneb 1 (ühe) aasta võrra. Esimene hoolduslepingus märgitud iga-aastane hooldus tehakse esimese garantiiaasta möödumisel, edaspidi 6-kuuliste intervallidega. Garantii sisu. Garantiiandja vastutab
Explore »

Door installation

Lifting gates and partitions Champion Door can be installed in several ways: directly in the opening, overlay on the opening from the inside or outside of the building.
Explore »

Jään Teie vastust ootama.

 

Teen Teie kirja põhjal esialgsed päringud ja seejärel võiksime juba kohtuda.

 

Ilja Ljah
Juhatuse Liige

ilja.ljah@champion-door.eu
+358 44045 8240

Hankige spetsialisti konsultatsioon

KATALOOG

TEENUSED

ETTEVÕTE

KONTAKTI

(+372) 5808 4218

info@champion-door.eu

Lehola tee 1
76612 Lehola
ESTONIA

© 2024CHAMPIONGROUP OÜ.
• Privacy• Sitemap
• Made by BlueGlass